Posts: 3,657
Threads: 20
Likes Received: 5,730 in 1,999 posts
Likes Given: 20,036
Joined: May 2020
Reputation:
4,540
03-07-2021, 01:42 AM
(This post was last modified: 03-07-2021, 01:45 AM by GAW9576.)
(03-06-2021, 11:31 PM)twhite Wrote: Well here is everything. I definitely need to modify the head. It is too fragile in the ellipse area. Had to stop working on everything 3 hours age. Had a plumbing backup on my washing machine. Flooded the floor and I had to tear a bunch of piping out to snake it. The joys of a 90 year old house with lots of original plumbing. Got it unclogged and put som drain cleaner in to let sit overnight. I will put it all back together tomorrow.
E gadd's sounds like a real pain. I can relate though our house is 121 years old and has many many quirks.
(03-07-2021, 01:40 AM)twhite Wrote: If I can get a few say 4-6 good heads built next week. I was thinking of letting you guys test them for me. All I ask is you cover shipping and a bit of time.
Please let me know here if you are down with that.
Absolutely. You can definitely count me in.
Posts: 464
Threads: 13
Likes Received: 929 in 425 posts
Likes Given: 697
Joined: Mar 2020
Reputation:
355
(03-07-2021, 01:42 AM)GAW9576 Wrote: (03-06-2021, 11:31 PM)twhite Wrote: Well here is everything. I definitely need to modify the head. It is too fragile in the ellipse area. Had to stop working on everything 3 hours age. Had a plumbing backup on my washing machine. Flooded the floor and I had to tear a bunch of piping out to snake it. The joys of a 90 year old house with lots of original plumbing. Got it unclogged and put som drain cleaner in to let sit overnight. I will put it all back together tomorrow.
E gadd's sounds like a real pain. I can relate though our house is 121 years old and has many many quirks.
(03-07-2021, 01:40 AM)twhite Wrote: If I can get a few say 4-6 good heads built next week. I was thinking of letting you guys test them for me. All I ask is you cover shipping and a bit of time.
Please let me know here if you are down with that.
Absolutely. You can definitely count me in.
killer. I don’t want to send anything out until it is half way presentable.
I was thinking $8-10. I need to find some small boxes. Not sure what they will cost. With any luck, I would like to send them out next weekend.
as always I ask that you all be brutally honest. That is the only way to improve my designs. You will not hurt my feelings. That I can assure you. 
Lost, If found do not return and do not feed.
Posts: 4,383
Threads: 129
Likes Received: 11,463 in 4,193 posts
Likes Given: 5,989
Joined: Apr 2020
Reputation:
8,810
03-07-2021, 02:26 AM
(This post was last modified: 03-07-2021, 02:28 AM by Jayaruh.)
I'm down for that. Of course.
I see you like to reply inside the box a lot. HAHA! I remember someone somewhere getting a CT for that.
Jim - The Cackalacky Kid "Finally, shaving is fun again..."
The Jayaruh Brushes - The Clan of Catchers
Posts: 464
Threads: 13
Likes Received: 929 in 425 posts
Likes Given: 697
Joined: Mar 2020
Reputation:
355
(03-07-2021, 02:26 AM)Jayaruh Wrote: I'm down for that. Of course.
Ok 2 down and 2-4 to go. Yippee
Lost, If found do not return and do not feed.
Posts: 1,979
Threads: 61
Likes Received: 5,935 in 1,895 posts
Likes Given: 4,669
Joined: Feb 2021
Reputation:
5,122
(03-06-2021, 12:33 AM)GAW9576 Wrote: I carefully taped a sharp injector blade by just the edges to the sharp enders blade being sure the cutting edges were lined up properly. Put JB over the injector AND squeegeed the JB back and forth with an old credit card to get it down into the holes and behind it. Then scraped the access down to be level with the top of the injector. Then carefully removed the injector blade while the JB was still wet.
Once the JB was dry I did a little fine tuning with an Exacto knife. I did not need any release agents because the injector blade was removed while the JB was wet. Also I did rough up the enders blade were the JB would be first to help it grip better. After all is done I removed the entire bevel of the cutting edge of the Enders blade to be sure it would not interfere with shaving in the future.
(03-07-2021, 01:40 AM)twhite Wrote: If I can get a few say 4-6 good heads built next week. I was thinking of letting you guys test them for me. All I ask is you cover shipping and a bit of time.
Please let me know here if you are down with that.
Oh yeah, I'm in if I'm included in "The Gang"
Viewer # 7 Musketeer #1
Running Amuck !
Posts: 3,657
Threads: 20
Likes Received: 5,730 in 1,999 posts
Likes Given: 20,036
Joined: May 2020
Reputation:
4,540
(03-07-2021, 02:16 AM)twhite Wrote: (03-07-2021, 01:42 AM)GAW9576 Wrote: E gadd's sounds like a real pain. I can relate though our house is 121 years old and has many many quirks.
Absolutely. You can definitely count me in.
killer. I don’t want to send anything out until it is half way presentable.
I was thinking $8-10. I need to find some small boxes. Not sure what they will cost. With any luck, I would like to send them out next weekend.
as always I ask that you all be brutally honest. That is the only way to improve my designs. You will not hurt my feelings. That I can assure you.
I get the small flat rate shipping boxes from the post office for free. They are $8 and change to ship with $50 insurance and tracking included. Most razors I've shipped have fit very comfortably in them.
Posts: 464
Threads: 13
Likes Received: 929 in 425 posts
Likes Given: 697
Joined: Mar 2020
Reputation:
355
Oh yeah, I'm in if I'm included in "The Gang"
You are in.
Lost, If found do not return and do not feed.
Posts: 2,739
Threads: 134
Likes Received: 5,017 in 2,321 posts
Likes Given: 733
Joined: Mar 2020
Reputation:
3,373
So I get busy a few days and things blow up eh? Great looking stuff here twhite. If I can get in on the test let me know where to paypal the shipping cost!
Happy shaves to ya!
Posts: 2,739
Threads: 134
Likes Received: 5,017 in 2,321 posts
Likes Given: 733
Joined: Mar 2020
Reputation:
3,373
(03-07-2021, 02:26 AM)Jayaruh Wrote: I'm down for that. Of course.
I see you like to reply inside the box a lot. HAHA! I remember someone somewhere getting a CT for that. I was thinking this same thing.....
Happy shaves to ya!
Posts: 464
Threads: 13
Likes Received: 929 in 425 posts
Likes Given: 697
Joined: Mar 2020
Reputation:
355
(03-07-2021, 04:45 PM)Wchnu Wrote: So I get busy a few days and things blow up eh? Great looking stuff here twhite. If I can get in on the test let me know where to paypal the shipping cost! When I get it all sorted. I will let you know. Hopefully next week.
Lost, If found do not return and do not feed.
|
