tost3
The Rolls Traveler Razor - Printable Version

+- tost3 (https://www.tost3.com)
+-- Forum: Razors (https://www.tost3.com/forumdisplay.php?fid=6)
+--- Forum: Other SE brands. (https://www.tost3.com/forumdisplay.php?fid=50)
+--- Thread: The Rolls Traveler Razor (/showthread.php?tid=42)



The Rolls Traveler Razor - Jayaruh - 04-27-2020

I received this Rolls Traveler set on February 14, 2018. It is complete with instructions, case, and an extra unused blade. The blade that was used is in bad shape, but I am happy that the unused blade was in great shape. The hone and the strop sides are both in good shape, too. The Rolls is basically a straight on a stick. This is a razor that I believe I will be able to use one day.

February 14, 2018
[Image: RollsTraveler_01.JPG]

[Image: RollsTraveler_02.JPG][Image: RollsTraveler_03.JPG]

 February 19, 2018

[Image: RollsTraveler_04.JPG]

[Image: RollsTraveler_05.JPG]

[Image: RollsTraveler_06.JPG]

[Image: RollsTraveler_07.JPG]

[Image: RollsTraveler_08.JPG]

The date on the blade is 1953.

[Image: RollsTraveler_09.JPG]



RE: The Rolls Traveler Razor - Tony'schin - 04-27-2020

(04-27-2020, 03:59 PM)Jayaruh Wrote: I received this Rolls Traveler set on February 14, 2018. It is complete with instructions, case, and an extra unused blade. The blade that was used is in bad shape, but I am happy that the unused blade was in great shape. The hone and the strop sides are both in good shape, too. The Rolls is basically a straight on a stick. This is a razor that I believe I will be able to use one day.

February 14, 2018
[Image: RollsTraveler_01.JPG]

[Image: RollsTraveler_02.JPG][Image: RollsTraveler_03.JPG]

 February 19, 2018

[Image: RollsTraveler_04.JPG]

[Image: RollsTraveler_05.JPG]

[Image: RollsTraveler_06.JPG]

[Image: RollsTraveler_07.JPG]

[Image: RollsTraveler_08.JPG]

The date on the blade is 1953.

[Image: RollsTraveler_09.JPG]
I had my 1st 2 Rolls shaves this month. 1st one went really well with the stainless version, however, the shave with the Aluminium version was a little rough towards the end. 
I have tried honing and stropping the blade ready for the next run out.
I also have a few unused blades in boxes although,  I am not sure if they are shave ready..
I did enjoy the experience though.[Image: P4160006.jpg]