(03-06-2021, 11:31 PM)twhite Wrote: Well here is everything. I definitely need to modify the head. It is too fragile in the ellipse area. Had to stop working on everything 3 hours age. Had a plumbing backup on my washing machine. Flooded the floor and I had to tear a bunch of piping out to snake it. The joys of a 90 year old house with lots of original plumbing. Got it unclogged and put som drain cleaner in to let sit overnight.  I will put it all back together tomorrow.

(03-07-2021, 01:40 AM)twhite Wrote: If I can get a few say 4-6 good heads built next week. I was thinking of letting you guys test them for me. All I ask is you cover shipping and a bit of time.

Please let me know here if you are down with that.

(03-07-2021, 01:42 AM)GAW9576 Wrote:

(03-06-2021, 11:31 PM)twhite Wrote: Well here is everything. I definitely need to modify the head. It is too fragile in the ellipse area. Had to stop working on everything 3 hours age. Had a plumbing backup on my washing machine. Flooded the floor and I had to tear a bunch of piping out to snake it. The joys of a 90 year old house with lots of original plumbing. Got it unclogged and put som drain cleaner in to let sit overnight.  I will put it all back together tomorrow.

E gadd's sounds like a real pain. I can relate though our house is 121 years old and has many many quirks.

---

(03-07-2021, 01:40 AM)twhite Wrote: If I can get a few say 4-6 good heads built next week. I was thinking of letting you guys test them for me. All I ask is you cover shipping and a bit of time.

Please let me know here if you are down with that.

Absolutely. You can definitely count me in. 


killer. I don’t want to send anything out until it is half way presentable.
I was thinking $8-10. I need to find some small boxes. Not sure what they will cost. With any luck, I would like to send them out next weekend. 

as always I ask that you all be brutally honest. That is the only way to improve my designs. You will not hurt my feelings. That I can assure you. 

(03-07-2021, 02:26 AM)Jayaruh Wrote: I'm down for that. Of course.

(03-06-2021, 12:33 AM)GAW9576 Wrote: I carefully taped a sharp injector blade by just the edges to the sharp enders blade being sure the cutting edges were lined up properly. Put JB over the injector AND squeegeed the JB back and forth with an old credit card to get it down into the holes and behind it. Then scraped the access down to be level with the top of the injector. Then carefully removed the injector blade while the JB was still wet.
Once the JB was dry I did a little fine tuning with an Exacto knife. I did not need any release agents because the injector blade was removed while the JB was wet. Also I did rough up the enders blade were the JB would be first to help it grip better. After all is done I removed the entire bevel of the cutting edge of the Enders blade to be sure it would not interfere with shaving in the future.

(03-07-2021, 01:40 AM)twhite Wrote: If I can get a few say 4-6 good heads built next week. I was thinking of letting you guys test them for me. All I ask is you cover shipping and a bit of time.

Please let me know here if you are down with that.

(03-07-2021, 02:16 AM)twhite Wrote:

(03-07-2021, 01:42 AM)GAW9576 Wrote: E gadd's sounds like a real pain. I can relate though our house is 121 years old and has many many quirks.

---

Absolutely. You can definitely count me in. 


killer. I don’t want to send anything out until it is half way presentable.
I was thinking $8-10. I need to find some small boxes. Not sure what they will cost. With any luck, I would like to send them out next weekend. 

as always I ask that you all be brutally honest. That is the only way to improve my designs. You will not hurt my feelings. That I can assure you. 

(03-07-2021, 02:26 AM)Jayaruh Wrote: I'm down for that. Of course.
I see you like to reply inside the box a lot. HAHA! I remember someone somewhere getting a CT for that.

(03-07-2021, 04:45 PM)Wchnu Wrote: So I get busy a few days and things blow up eh? Great looking stuff here twhite. If I can get in on the test let me know where to paypal the shipping cost!